Search
the Online
Listing Directory
|
|
Wanted - Engineering, Sawmilling - Engineering, Sawmilling
| More Info |
Plant |
Description |
| 07wes |
SMALL GREASEGUN WANTED |
Air pump type for 2.5 litre pails |
| 10wes |
DRUM SANDER WANTED |
40 inch |
| 11wes |
THICKNESSER WANTED |
40 inch |
| 25wes |
PLATE ROLLERS WANTED |
Motorised to handle 600mm wide sheets of 3mm stainless |
| 27wes |
AC/DC WELDER WANTED |
Syncrowave 250 or similar |
| 28wes |
LINISHER WANTED |
50mm wide sanding belt |
| 29wes |
TIMBER TANALISING PLANT WANTED |
To treat 4 to 5m poles. Require trolleys, chamber, vacuum pump, rails, etc |
| 30wes |
AC/DC TIG WELDER WANTED |
Used, in good condition |
| 31wes |
WELDER GENERATOR WANTED |
Used, diesel powered, portable. |
| 32wes |
SHEET METAL FOLDER WANTED |
Small, used, model for folding up to 2mm alloy into brackets with 1 metre long cutter |
| More Info |
Plant |
Description |
| 33wes |
PIPE THREADER WANTED |
For threading up to 2.5 inch steam pipe to BSP standard. Second hand, floor model, in good condition. |
| 34wes |
PACK SAW WANTED |
Either a heavy or a portable pack saw. |
| 35wes |
SMALL METAL LATHE WANTED |
2 hp, geared head, minimum 6 speed, with 3 or 4 jaw chuck. Gear box only plus the chuck. The rest of the machine is not required. |
| 36wes |
SELF ALIGNING ROTATORS WANTED |
Preferably something that will support around 60 ton. One set will need to have the driving unit and one set non drive. |
| 37wes |
MACHINE TO MAKE DISHED SURFACES WANTED |
Machine to knuckle dished heads from approximately 500mm diameter up to 1100mm diameter. From duplex stainless steel 2304 and 2205, 2,3 or 4 mm thickness. |
|
|
|
